eCoach Military functionality

World wide a lot of towers are handling military traffic as part of their daily work. eCoach has support for simulating military aircrafts and maneuvers. Especially handling fast, agile fighters flying in formation is a challenge for pseudo pilots. eCoach has taken this challenge and contain functionality to help pseudo pilots to execute complex operations with ease.

Flying Formation

eCoach support several types of formation flying including formation take-off, formation landing and airborne maneuvers. This includes hot and slow side for landing formations.

Break pattern

Fly break pattern with circle to land and control the individual elements of the formation with various options for Touch & Go.

Flame out

Simulate maneuvers which are difficult to hand-fly. eCoach supports operations as simulated flame-out (SFO) with close pattern turns and steep descend angles.

Helicopter operations

Take-off and land helicopters at any position. Execute auto-rotation landings.

 

 

Fighters circling in the sunset at Bergen airport, Norway

 

 

 
eCoach can use a large variety of hardware and displays
 eCoach can be delivered as a portable system
   eCoach can use BADA aircraft performance data
  Record, playback and resume voice and data from an exercise
Create, modify and test run exercises using the powerful Exercise Designer, at office, home or on travel 
Run multiple exercises using multiple airspace configurations in parallel (Enterprise edition)
Work graphically to display and modify aircraft trajectory and profile
Safety nets: Short Term Conflict Alert (STCA), Minimum Safe Altitude Warning (MSAW), Area Penetration Warning (APW) and Jurisdiction Mismatch Warning (JMW)
Supports military operations and maneuvers
Electronic Flight Strips for tower operations
Remote simulation
  3D TWR Binoculars with panning and zooming

 

eCoach ATC Training simulators 

The eCoach family of ATC training simulators contains two (2) basis simulators (Enterprise and Basic) with different capabilities. eCoach 3D TWR is an extension that can be added to the basis simulators for 3D tower view visualization. In addition, both Enterprise and Basic can be used for simulations feeding existing systems with simulated data such as radar, ADS, AFTN, etc.

 

 

 

eCoach Enterprise

The Enterprise edition is a complete ATC training simulator that includes eCoach Server, Exercise Designer, Pilot(s) and Controller Working Position(s). In addition to the ATC simulator, the eCoach Server contains radar- and flight plan processing. This version can run multiple exercises in parallel for radar and procedural control. Add eCoach 3D TWR extension to provide 3D tower visualization and ground simulation.

 

 

eCoach Basic

The eCoach Basic is an all-in-one, server-less ATC training simulator. It enables training in groups of up to 8 positions (pseudo pilots and controller working positions) and is ideal for small size simulators. eCoach Basic is a very scalable system and it can be delivered as a fully portable ATC training simulator. This version can run a single exercise for radar and procedural control. Add eCoach 3D TWR extension to provide 3D tower visualization and ground simulation.

eCoach 3D Tower

The eCoach 3D Tower is an extension to Enterprise and Basic editions to provide tower view and airport ground simulations. Several options for visualization are available such as projector on flat or curved screens, large LCDs, etc.

 

eCoach ACC & APP

The eCoach ACC & APP simulators provide the training environments for area and approach control centers. The simulators are based on the technologies eCoach Enterprise and eCoach Basic. The technologies provide scalable solutions depending on customer needs - Tower simulations can be seamlessly integrated. eCoach ACC & APP can be used for various types of training from ab-initio to ATC Controller refresher training.

The simulator contains two major parts, the Simulation System and an ATC system.

Simulation System

The Simulation System contains several subsystems.

ATC Environment Simulator (AES)

The ATC Environment Simulator (AES) is the core of the simulation. The AES is responsible for providing the simulated data such as radar track, AFTN-messages, weather data, time information and a lot more, to the ATC system. 

  Part of it is also to handle input and responses from pseudo pilots (PP) and training session supervisors (TSS). The basis for the simulations are exercises created by the Exercise Designer and published to and maintained by the AES. The Enterprise version can run multiple exercises in parallel, each with its own set of airspace data. Hence, it's possible to run a simulation for Australia at the same time as a simulation for Mexico.

Exercise Designer (ED)

The Exercise Designer (ED) is a vital part of the simulation system. From these working positions, exercises and airspace is created and maintained. These positions can run exercises locally at the ED itself to test and verify exercise behavior.

The ED is not dependent on the AES to perform its tasks and may very well be installed on a portable PC which can be used off-line to the simulator itself, e.g. at the home office. When the exercise is tested and verified, the PC is connected to the AES network and exercises and/or airspace data is downloaded to the database in the AES. The ED also contains an import function to import exercise data from other formats.  

 

Pseudo Pilot (PP)

  From the Pseudo Pilot (PP) working position, instructors and supervisors can control simulated data such as aircraft, vehicles, weather, emergencies etc. The user interface contains radar view for control of airborne aircraft and if ground simulations are part of the simulation, a separate surveillance window for ground control. This window can be put on a separate touch input device (see eCoach 3D Tower for more information).

Training Session Supervisor (TSS)

 

The Training Session Supervisor (TSS) controls the training environment via the Server Manager application. From this application the TSS can assign working positions, pseudo pilots, and other equipment to a training session and get the status of the equipment and the running exercises. 

The TSS can assign working positions and pseudo pilots to a running exercise, and also update software and airspace data on the system.

ATC System

The eCoach ATC system receives simulated data from the eCoach ATC Environment Simulator, similar to an operational ATC system receiving operational data.

Flight Data Processing (FDP)

Flight plans, ATS messages, and MET messages are handled by the Flight Data Processing unit before data distribution to working positions and to the Surveillance Data Processing. The eCoach FDP computes flight profile, trajectory and estimates (4D) based on available information from the flight plan, including information regarding departure and arrival runway, SID, STAR, and IAP. This information is also used to calculate the sectors involved in the flight, which are used for strip distribution and flight lists updates.

Surveillance Data Processing (SDP)

Surveillance data (radar, ADS, MLAT) are handled by the Surveillance Data Processing unit. This unit will associate the surveillance data with flight plans before distributing associated system tracks to the working positions. The SDP is also responsible for processing safety net data:

  • Short Term Conflict Alert (STCA)
  • Minimum Safe Altitude Warning (MSAW)
  • Area Penetration Warning (APW) also called Danger Area Infringement Warning (DAIW)
  • Jurisdiction Mismatch Warning

Controller Working Positions (CWP)

The Controller Working Position (CWP) contains the following functionality:

  • Radar Windows
  • Flight Data Lists
  • Voice Communication terminal
  • Information System
  • SMGCS window (ground simulation)

The number of physical displays to show the various information is configurable. The VCS can also be equipped according to user preferences. 

Electronic Flight Strips

The ACC/APP CWP uses flight data lists and can be equipped with strip printers. Strip content and look can be configured.

For systems which includes ground simulation, the tower working positions can be equipped with Electronic Flight Strips as an option.

Strip content and look can be configured.

 

Simulation using legacy system for controller training

eCoach can be configured to simulate interfaces towards a legacy system, typically radar data and ATS and MET messages received via AFTN. Other interfaces can also be emulated, but might require additional engineering that needs to be estimated as part of a quote.

Edge blending

Edge blending is a technique to create a seamless picture using multiple projectors. Each projector displays a picture which is larger that it's main area (light pink), creating an overlap area with the neighbour projector. In the overlap area (dark pink). The picture will gradually fade out towards the neighbour projector. Using this technique, it's possible to create a seamless 360 degree picture. Edge blending is integrated into the eCoach 3D Twr software so there is no need for edge blending support in projectors or extra software.

 

 

Warped and edge blended curved screen simulator.